Welcome to have ten steps about How to Change Oil in Your Car. You can do it yourself at home. Also, it will save you time and money. You just need to pinpoint the individual parts of a car and get your hands on the right equipment for changing the oil. If you haven’t bought the best motor oil for your car, our Complete and Best Synthetic Oil guide will surely help you. Do check it.
For changing your car’s oil yourself warm your engine for 2-4 minutes, but don’t make the engine so hot that you burn yourself. When it is moderately warm to touch, turn your engine off.
10 Steps to Change Oil in Your Car
1. You Need To Park Your Car At A Leveled Area
It can be your garage or any other parking spot. Also, you must have a spacious working area on the sides of your vehicle. Park your car and let your car cool down for 5-8 minutes. If you didn’t let your vehicle to cool down for a few minutes, it could create a huge blunder. You may burn yourself.
2. Find Drain Plug Which Is Beneath Your Car
The drain is placed under the oil pan at the bottom of your engine. Either you have to drag under your car or use a jack to reach that point. By using a jack to lift your vehicle, it will create enough space to quickly find the drain plug of your vehicle and work underneath it.
3. Use Jack Or Steel Ramps
Some people use steel ramps, which they find more convenient to use rather than using a jack. It is usually about 4 feet (1.2 m). Ramps are commonly used at the shops of mechanics. Double-check that your vehicle is stable and free of any other movements. So, you can work safely below your vehicle.
4. To Drain, Place A Container Located Underneath Oil Drain Plug And Unfix The Oil Drain Plug
The container shall be large enough to drain the oil. It should hold double capacity rather than that amount of oil which your car uses. Use any clothe or towel as the oil will drain now.
5. Uncover The Cap From The Oil Filler Hole At The Above Of Your Engine And Unscrew The Oil Filter And Drain The Oil From Filter Pan
You have to move counterclockwise to unscrew the oil plug by using a socket or a crescent wrench. Be cautious while loosening it because a few drops of oil may spill. If there are any leftover, remove them too. When it is empty, cover it with a newspaper and recycle the old oil. Since the liquid is very thick, it might take a few minutes to drain out completely.
6. Open Another Bottle Of Oil And Soak Your Finger Into It And Fix The New Filter Into Engine
Use oil to damp the gasket on the top of the new oil filter. Now, Lead the instructions given on the filter, and gently give a three quarter turn.
7. Clean The Sides Of Oil Drain Plug. Do This Step Only When The Oil Is Unloaded!
Renew the oil drain plug and use a wrench to tighten it. Make sure to get rid of the old gasket if your car had an old gasket.
8. By Using A Funnel Tube Pour All But 1 Quarter Of The Fuel Oil Into The Oil Filter Hole
The oil filters are usually of blue, black and white cylinders and about 4-6 inches long (10-15cm) and 3 inches wide (7.6cm), like a large can. Pour it steadily and then allow the oil time to run down. Make sure, to put the oil filter cap before you start your engine for 30-60 seconds. You have to make sure that there is no leakage in the oil drain or around the filter. If you find that there is a leakage, then shut down the engine and let it cool for about 6-10 minutes and then tighten the cap under the car. Usually, the oil leakage is occurring from that spot.
9. Stop The Engine And Wait For 6-10 Minutes For The Oil To Adjust At The Pan And Check The Level Of Oil Again, And Then Add Oil Continuously But Little At A Time
Detach the oil dipstick, clean it with a towel, lint-free rag and push it back in. Drag it out again and check it. Check the stick each and every time you add the oil until you reach full on the line of the dipstick. If the vehicle is still low, then pour another ounce and wait for another 5 minutes for the oil to settle down. The different sides of the dipstick will give you the indication that oil is hot or cold.
10. Takeaway The Drain Pan And Do A Test Drive Of Your Car
You have to go around the block several times. The oil will settle down for 8-10m, then check the dipstick again. If it is “filled to the top”, you are good to go!
Before we proceed with the final thoughts, Whenever you are changing the vehicle motor oil. It is highly recommended to change the filter as well. We do have a very comprehensive guide on Best Synthetic Oil Filter. We like you to check it and do let us know if you need any help.
We hope you have found the answer to your question How to Change the Oil in Your Car. Adding it to a new emptied container might be the best and safest option. There are other options like milk jugs, plastic water bottles. But you should be cautious as you are using food bottles. And mark them clearly for your future safety.
Watch The Video on How to Change the Oil of your Car Yourself
Also, mark it that this is used oil. In case you might forget. Do not put it in the bottles of bleach, pesticides, paint containers or anti-freeze as it will contaminate even more. Don’t just dispose of it off in your backyard. It needs to be disposed of properly. Find a specified oil-collection site near your home. Many service stations will take your used oil, and some may cause a little fee. There are many companies who recycle the sludgy oil, and even you can buy it. It will cost less than the new oil. Next time you shop, ask if they sell recycled oil.